Walls Exterior
Apply @ 4sqm/L per coat
Features
- Matt coarse texture finish.
- Bridge fine hairline cracks.
- Hides minor imperfections.
- UV and moisture resistant.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 6-8sqm/L per coat
Features
- Low sheen medium texture finish.
- Bridge fine hairline cracks to prevent moisture ingress.
- Hides minor imperfections.
- Dries to a flexible and resilient film for long term durability.
- UV and moisture resistant.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 10sqm/L per coat
Features
- Formulated as a hydrophobic exterior waterproof coating ideal for humid and coastal regions.
- Mold, fungal and UV resistant.
- Flexible fibre reinforced film for long term durability.
- Bridge hairline cracks.
- Dries to a medium sheen finish.
- Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
- Virtually odourless for ease of application.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement and gypsum plaster.
- Areas exposed to direct moisture and high humidity.
Apply @ 8-10sqm/L per coat
Features
- Dries to a smooth hydrophobic low sheen finish.
- Colourfast.
- UV, moisture and fungal resistant.
- Direct application to dry and stable paving. Regular maintenance coats might be required depending on traffic and conditions.
- Quality guarantee does not apply to application on floors, paving and pots.
- Heat reflective technology for long term durability and improved TSR (total solar reflectance) of minimum 30% compared to the same colour in ApEx or Roof&Pave. White with the highest TSR is recommended as a base coat to further improve reflective value.
- Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
- Virtually odourless for ease of application.
Where to use
- Suitably primed new and previously painted stable galvanised, tile and clay pitched roofs.
- Dry cementitious paving, cobble stones and garden pots.
Apply @ 8-10sqm/L per coat
Features
- Adhesion promoted odourless high sheen for multiple surfaces.
- Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
- Hard and durable, block and stain barrier non yellowing water based enamel.
- Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
- Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
- Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
Apply @ 10-12sqm/L per coat
Features
- Fast drying, adhesion promoted odourless mid sheen for multiple surfaces.
- Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
- Hard and durable, block and stain barrier non yellowing Eggshell alternative.
- Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
- Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
- Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
Apply @ 10sqm/L per coat
Features
- Hydrophobic flexible smooth low sheen for exterior use.
- Stain, dirt, UV, mold and fungal resistant.
- Fully washable with excellent flow and levelling for interior use.
- Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
- Long term, broad spectrum anti-bacterial protection (silver technology).
- Virtually odourless for ease of application.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, galvanised steel, fibre-cement and gypsum plaster.
- Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
Apply @ 10sqm/L per coat
Features
- Hydrophobic flexible smooth suede sheen for exterior use.
- Stain, dirt, UV, mold and fungal resistant.
- Fully washable for interior use.
- Hides minor imperfections.
- Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
- Virtually odourless for ease of application.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement, galvanised steel and gypsum plaster.
Apply @ 8-10sqm/L per coat
Features
- Walls & ceilings top coat.
- Interior – dries to a fully washable stain resistant matt finish.
- Washable – do not scrub or abrade.
- Exterior – breathable, moisture and UV resistant for long term durability.
- Hides minor imperfections.
- Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
- Virtually odourless for ease of application.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement and gypsum plaster.
Apply @ 8-10sqm/L per coat
Features
- Lap mark free fine texture finish.
- Dust and dirt proof.
- Hides minor imperfections.
- Bridge fine hairline cracks.
- UV and moisture resistant.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 6-8sqm/L per coat
Features
- Dries to a smooth low sheen finish.
- Colourfast.
- UV, water and fungal resistant.
- Direct application to dry and stable paving. Regular maintenance coats might be required depending on traffic and conditions.
- Quality guarantee does not apply to application on floors, paving and pots.
Where to use
- Suitably primed new and previously painted stable galvanised, tile and clay pitched roofs.
- Dry cementitious paving, cobble stones and garden pots.
Apply @ 10sqm/L per coat
Features
- Formulated for interior and exterior use.
- Dries to a resilient smooth low sheen finish.
- Fully washable and stain resistant for interior use.
- UV and dirt resistant for exterior use.
- Good flow and levelling.
- Low odour for ease of application.
Where to use
- Walls & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, galvanised metals, fibre-cement and gypsum plaster.
Apply @ 10sqm/L per coat
Features
- Non yellowing water based gloss for multiple surfaces.
- Mold and fungal resistant for areas exposed to moisture and humidity.
- Dries to a hard and stain resistant film for surfaces where extra durability is required.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
- Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
- Ideally suited for walls, doors, trims, kitchens and bathrooms.
Apply @ 7-10sqm/L per coat
Features
- Smooth silk sheen finish.
- Flexible waterproofing properties ideal for exterior use.
- Fully washable and stain resistant for interior surfaces.
- Low odour for ease of application.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.
Apply @ 6-10sqm/L per coat
Features
- Walls & ceilings top coat.
- Interior – dries to a smooth ultra matt finish that hides minor imperfections.
- Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
- Exterior – not recommended for areas exposed to regular moisture or rainfall.
- High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.
Apply @ 4-6sqm/L per coat
Features
- Matt texture finish.
- Bridge fine hairline cracks.
- Hides minor imperfections.
- UV and moisture resistant.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 6-8sqm/L per coat
Features
- ALL – IN – ONE – primer / undercoat / topcoat if applied over dry and porous surfaces.
- For long term stability and durability apply an alkaline resistant primer.
- Dries to a smooth waterproof matt finish.
Where to use
- Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
Apply @ 6-10sqm/L per coat
Features
- Interior – dries to an ultra matt finish that hides minor imperfections.
- Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
- Exterior – not recommended for areas exposed to regular moisture or rainfall.
- High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.
Where to use
- Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.
Apply @ 8-10sqm/L per coat
Features
- General purpose gloss enamel.
- Dries to a medium gloss finish.
- Interior and exterior use.
- Hard and durable, heavy duty coating.
- Good flow and levelling.
- UV resistant.
Where to use
- Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
- For areas where hard wearing and block resistance is required.
Apply @ 6sqm/L per coat
Features
- General purpose gloss enamel.
- Dries to a low gloss finish.
- Interior and exterior use.
- Hard and durable, heavy duty coating.
- Good flow and levelling.
Where to use
- Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
- For areas where hard wearing and block resistance is required.
Apply @ 10sqm/L per coat
Features
- Non-drip alkyd enamel.
- Dries to a satin finish.
- Hard and durable polyurethane based coating.
- Excellent flow and levelling.
- Quality guarantee does not apply to exterior applications.
Where to use
- Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
- Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.
LAMININ COATINGS (PTY) LTD
FREE STATE / GAUTENG | 051 433 1960 | 051 447 9413
WESTERN CAPE | 021 851 0337
EASTERN CAPE | 087 354 0889
NORTHERN CAPE | 051 433 1960 | 051 447 9413
