Exterior Mild Steel
HydroShell
Water based enamel
Apply @ 8-10sqm/L per coat
– Features
– Adhesion promoted odourless high sheen for multiple surfaces.
– Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
– Hard and durable, block and stain barrier non yellowing water based enamel.
– Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
– Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
TruVelvet®
Odourless mid sheen
Apply @10-12sqm/L per coat
– Features
– Fast drying, adhesion promoted odourless mid sheen for multiple surfaces.
– Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
– Hard and durable, block and stain barrier non yellowing Eggshell alternative.
– Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
– Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
SunShield
Heat reflective roof
Apply @ 8-10sqm/L per coat
– Features
– Dries to a smooth hydrophobic low sheen finish.
– Colourfast.
– UV, moisture and fungal resistant.
– Direct application to dry and stable paving. Regular maintenance coats might be required depending on traffic and conditions.
– Quality guarantee does not apply to application on floors, paving and pots.
– Heat reflective technology for long term durability and improved TSR (total solar reflectance) of minimum 30% compared to the same colour in ApEx or Roof&Pave. White with the highest TSR is recommended as a base coat to further improve reflective value.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Virtually odourless for ease of application.
– Where to use
– Suitably primed new and previously painted stable galvanised, tile and clay pitched roofs.
– Dry cementitious paving, cobble stones and garden pots.
HiGloss
High gloss enamel
Apply @ 10-12sqm/L per coat
– Features
– General purpose gloss enamel.
– Dries to a high gloss finish.
– Interior and exterior use.
– Highly durable, heavy duty coating.
– Excellent flow and levelling.
– UV resistant.
– Super White dries to a non-yellowing film.
– Where to use
– Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
– For areas where hard wearing and block resistance is required.
TorTus
Water based gloss
Apply @ 10sqm/L per coat
– Features
– Non yellowing water based gloss for multiple surfaces.
– Mold and fungal resistant for areas exposed to moisture and humidity.
– Dries to a hard and stain resistant film for surfaces where extra durability is required.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
– Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Ideally suited for walls, doors, trims, kitchens and bathrooms.
Shine
Medium gloss enamel
Apply @ 8-10sqm/L per coat
– Features
– General purpose gloss enamel.
– Dries to a medium gloss finish.
– Interior and exterior use.
– Hard and durable, heavy duty coating.
– Good flow and levelling.
– UV resistant.
– Where to use
– Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
– For areas where hard wearing and block resistance is required.
EkoGloss
Gloss enamel
Apply @ 6sqm/L per coat
– Features
– General purpose gloss enamel.
– Dries to a low gloss finish.
– Interior and exterior use.
– Hard and durable, heavy duty coating.
– Good flow and levelling.
– Where to use
– Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
– For areas where hard wearing and block resistance is required.
QDAlkyd
Quick dry enamel
Apply @ 10sqm/L per coat
– Features
– General purpose quick dry alkyd enamel.
– Dries to a gloss finish.
– Heavy duty coating.
– Where to use
– Suitably primed new and previously painted stable mild-, galvanised steel and wood.