Laminin Coatings Laminin Coatings

A preparatory coating to be applied directly to new or weathered substrates. The deep penetrating properties will create an inter-locking mechanism for proper adhesion between surfaces and total paint system.  An etch primer should be applied to non-penetrating, low energy substrates.

Water Based    Solvent/Oil Based

Apply @ 8-10sqm/L per coat

Features

  • Acrylic primer, sealer and undercoat.
  • Penetrating primer that seals dry and porous cementitious substrates to provide a sound surface.
  • Good alkaline resistance.
  • Excellent opacity and overcoating ability.
  • Water based alternative to traditional alkyd based plaster primer.

Where to use

  • Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.

Apply @ 8sqm/L per coat

Features

  • Acrylic primer, sealer and undercoat.
  • Direct application to dry and porous cementitious substrates to provide a sound surface.
  • Excellent adhesion and overcoating ability.

Where to use

  • Dry and porous stable cement plaster, concrete, brickwork and fibre-cement.

Apply @ 10sqm/L per coat

Features

  • Moisture tolerant alkyd plaster primer for interior and exterior.
  • Deep penetrating barrier coat that resists the movement of water and dissolved salts.
  • Preserves the integrity of the substrate by resisting the loss of soluble salts.
  • Protects the paint film against the effects of penetrating and rising damp, efflorescence and peeling.
  • Excellent opacity and overcoating ability.
  • The root cause of moisture must be addressed before application of DamCure. Not suitable for surfaces where recurring moisture is present.
  • Moisture tolerant up to 30%, allows for earlier priming of new cement plaster.
  • Provides a sound surface for long term stability.

Where to use

  • Stable cement plaster, concrete, brickwork and fibrecement.

Apply @ 8-10sqm/L per coat

Features

  • Penetrating alkyd primer, sealer and undercoat.
  • Direct application to dry and porous cementitious substrates to provide a sound surface.
  • Chalk-, lime- and alkaline resistant.
  • Good adhesion and overcoating ability.

Where to use

  • Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.

Apply @ 10sqm/L per coat

Features

  • Penetrating moisture tolerant alkyd / solvent plaster primer.
  • Direct application to dry and porous cementitious substrates to provide a sound surface.
  • Chalk-, lime- and alkaline resistant.
  • Excellent adhesion and overcoating ability.

Where to use

  • Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.

Apply @ 10-12sqm/L per coat

Features

  • Deep penetrating moisture tolerant alkyd bonding liquid.
  • Excellent adhesion.
  • Chalk-, lime and alkaline resistant.
  • Provides a sound surface for long term stability.

Where to use

  • Masonry, concrete, gypsum board, gypsum plaster and fibre cement.

Apply @ 10sqm/L per coat

Features

  • Normal dry rust resistant alkyd primer and undercoat.
  • Etching primer for mild steel surfaces.
  • Formulated with activated zinc phosphate as anticorrosive additive for long term durability and stability.
  • Excellent overcoating ability.

Where to use

  • Stable mild steel.

Apply @ 7-8sqm/L per coat

Features

  • Quick dry rust resistant alkyd primer and undercoat.
  • Etching primer for mild steel surfaces.
  • Formulated with activated zinc phosphate as anticorrosive additive for long term durability and stability.
  • Excellent overcoating ability.

Where to use

  • Stable mild steel.

Apply @ 8sqm/L per coat

Features

  • Deep penetrating alkyd wood primer, sealer and undercoat.
  • Excellent overcoating ability.
  • Long term stability.

Where to use

  • Hard wood, soft wood and chipboard.

A high pigmented coating to be applied over primer for film-build. Apply over previously painted stable surfaces to improve opacity and adhesion.

Water Based    Solvent/Oil Based

Apply @ 6sqm/L per coat

Features

  • High hiding high PVC PVA.
  • High build coating that is easy to sand.
  • Universal undercoat over previously painted acrylic systems.

Where to use

  • Walls & ceilings: suitably primed and previously painted stable cement plaster, concrete, porous brickwork, fibre-cement and gypsum plaster.

Apply @ 6sqm/L per coat

Features

  • Multi-purpose high PVC PVA..
  • High build coating that is easy to sand.
  • Universal undercoat over previously painted acrylic systems.

Where to use

  • Walls & ceilings: suitably primed and previously painted stable cement plaster, concrete, porous brickwork, fibre-cement and gypsum plaster.

Apply @ 6sqm/L per coat

Features

  • General purpose economic high PVC PVA.
  • High build coating that is easy to sand.
  • Blocking coat over previously painted acrylic systems.

Where to use

  • Walls & ceilings: suitably primed and previously painted stable cement plaster, concrete, porous brickwork, fibre-cement and gypsum plaster.

Apply @ 10sqm/L per coat

Features

  • Excellent block and overcoating ability.
  • Dries to a smooth high build film with good levelling.
  • Easy to sand.
  • Promotes intercoat adhesion.
  • Excellent opacity and stain locking properties.

Where to use

  • Intercoat over previously painted stable alkyd and acrylic systems.
  • Barrier coat to block-out dark and bright colours before recoating.
  • Stain locking over water damaged and soot marks.

Apply @ 10-14sqm/L per coat

Features

  • Good block and overcoating ability.
  • Promotes intercoat adhesion.
  • Easy to sand.

Where to use

  • Intercoat over previously painted stable alkyd and acrylic systems.
  • Barrier coat to block-out dark and bright colours before recoating.

Top Coats provide the decorative, protective and informative features.  Selection of top coat must be according to purpose and expectation.

Water Based    Solvent/Oil Based

Apply @ 8sqm/L per coat

Features

  • Alkyd eggshell enamel.
  • Dries to a matt finish.
  • Good flow and levelling.
  • Highly durable.
  • For interior use.

Where to use

  • Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
  • Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.

Top Coats provide the decorative, protective and informative features.  Selection of top coat must be according to purpose and expectation.

Water Based    Solvent/Oil Based

Apply @ 4-6sqm/L per coat

Features

  • Matt texture finish.
  • Bridge fine hairline cracks.
  • Hides minor imperfections.
  • UV and moisture resistant.

Where to use

  • Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.

Apply @ 6-8sqm/L per coat

Features

  • Dries to a smooth matt finish.
  • Colourfast.
  • UV and moisture resistant.
  • Direct application to dry and stable paving. Regular
    maintenance coats might be required depending on
    traffic and conditions.
  • Quality guarantee does not apply to application on
    floors, paving and pots.

Where to use

  • Suitably primed new and previously painted stable
    galvanised, tile and clay pitched roofs.
  • Dry cementitious paving, cobble stones and garden pots.

Top Coats provide the decorative, protective and informative features.
Selection of top coat must be according to purpose and expectation.

Water Based    Solvent/Oil Based

Apply @ 10sqm/L per coat

Features

  • Non yellowing water based gloss for multiple surfaces.
  • Mold and fungal resistant for areas exposed to moisture and humidity.
  • Dries to a hard and stain resistant film for surfaces where extra durability is required.

Where to use

  • Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
  • Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
  • Ideally suited for walls, doors, trims, kitchens and bathrooms.

Apply @ 7-10sqm/L per coat

Features

  • Smooth silk sheen finish.
  • Flexible waterproofing properties ideal for exterior use.
  • Fully washable and stain resistant for interior surfaces.
  • Low odour for ease of application.

Where to use

  • Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.

Apply @ 6-8sqm/L per coat

Features

  • ALL – IN – ONE – primer / undercoat / topcoat if applied over dry and porous surfaces.
  • For long term stability and durability apply an alkaline resistant primer.
  • Dries to a smooth waterproof matt finish.

Where to use

  • Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.

Apply @ 6-10sqm/L per coat

Features

  • Walls & ceilings top coat.
  • Interior – dries to a smooth ultra matt finish that hides minor imperfections.
  • Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
  • Exterior – not recommended for areas exposed to regular moisture or rainfall.
  • High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.

Where to use

  • Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.

Apply @ 6-10sqm/L per coat

Features

  • Interior – dries to an ultra matt finish that hides minor imperfections.
  • Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
  • Exterior – not recommended for areas exposed to regular moisture or rainfall.
  • High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.

Where to use

  • Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.

Apply @ 8-10sqm/L per coat

Features

  • General purpose gloss enamel.
  • Dries to a medium gloss finish.
  • Interior and exterior use.
  • Hard and durable, heavy duty coating.
  • Good flow and levelling.
  • UV resistant.

Where to use

  • Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
  • For areas where hard wearing and block resistance is required.

Apply @ 6sqm/L per coat

Features

  • General purpose gloss enamel.
  • Dries to a low gloss finish.
  • Interior and exterior use.
  • Hard and durable, heavy duty coating.
  • Good flow and levelling.

Where to use

  • Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
  • For areas where hard wearing and block resistance is required.

Apply @ 10sqm/L per coat

Features

  • Non-drip alkyd enamel.
  • Dries to a satin finish.
  • Hard and durable polyurethane based coating.
  • Excellent flow and levelling.
  • Quality guarantee does not apply to exterior applications.

Where to use

  • Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
  • Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.

Water Based    Solvent/Oil Based

Apply @ 8sqm/L per coat

Features

  • Normal dry stoep enamel.
  • Direct application to most stable substrates.
  • Good flow and levelling.
  • Dries to a smooth gloss finish.
  • Hard and durable.
  • Medium duty coating for household use.

Where to use

  • Stable concrete and cementitious substrates i.e. floors, stairs, windowsills etc.

Apply @ 12-16sqm/L per coat

Features

  • Protective silver alkyd enamel coating.
  • Dries to a flexible low gloss finish.
  • Heavy duty UV resistant coating.
  • Good anti corrosive and rust resistant properties.
  • Excellent ponding capability.

Where to use

  • Direct application to new and previously painted stable mild-, galvanised steel and cementitious substrates where there is no direct handling of the paint surface required.
  • For flat and pitched surfaces.
  • Direct application over bituminous sealers and products.
  • Not for use in water storage tanks or ponds with aquatic life.

Apply @ 10sqm/L per coat

Features

  • General purpose quick dry alkyd enamel.
  • Dries to a gloss finish.
  • Heavy duty coating.

Where to use

  • Suitably primed new and previously painted stable mild-, galvanised steel and wood.

Apply @ 4-8sqm/L per coat

Features

  • Interior and exterior use.
  • Weather resistant and water repellent.
  • Penetrating brick dressing.
  • Dries to a protective gloss finish.
  • Enhances natural colour.
  • Not recommended for walls where opposite side water penetration is likely.

Where to use

  • Porous vertical facebrick.

Apply @ 2-3sqm/L per coat

Features

  • Interior and exterior use.
  • UV and weather resistant.
  • Penetrating slasto and stone sealer.
  • Dries to a protective gloss finish.
  • Enhances natural colour.
  • Highly durable.

Where to use

  • Porous slasto, stone, quarry tile, sandstone, facebrick and concrete.

Block the pores in concrete and forms an impermeable layer to reduce the passage and absorption of moisture

Water Based    Solvent/Oil Based

Apply @ 6-10sqm/L per coat

Features

  • Flexible fibre reinforced acrylic waterproofing.
  • May be used with membrane when sealing roofs.
  • For parapets and walls apply in a criss-cross pattern to improve bridging of fine hairline cracks.
  • Not recommended for ponding or negative water pressure areas.
  • Overcoat with Roof&Pave or Apex for long-term durability.
  • Do not coat over bitumen products.

Where to use

  • Properly prepared pitched tile and galvanized iron roofs.
  • Stable plastered walls and parapets.

Apply @ 2-3sqm/L per coat

Features

  • Economical acrylic waterproofing with membrane.
  • Not recommended for ponding or negative water pressure areas.
  • Seal porous surfaces like tiled roofs with acrylic BondAll.
  • Overcoat with Roof&Pave or Apex for long term durability.
  • Do not coat over bitumen products.

Where to use

  • Pitched tile and galvanized iron roofs.
LAMININ COATINGS (PTY) LTD
13 MONUMENT ROAD
ORANJESIG
BLOEMFONTEIN 9301
info@laminincoatings.co.za
FREE STATE / GAUTENG | 051 433 1960 | 051 447 9413
WESTERN CAPE | 021 851 0337
EASTERN CAPE | 087 354 0889
NORTHERN CAPE | 051 433 1960 | 051 447 9413
©2020 LAMININ Coatings (PTY) Ltd | Disclaimer