TruVelvet
Apply @ 10sqm/L per coat
– Water based Interior
– Medium sheen acrylic
– Adhesion promoted
– Block- and stain resistant
– Excellent flow and levelling
– Mould- and fungal resistant
– Almost odourless
– Low VOC
– 15 Year Quality Guarantee
– Walls
– Kitchens & Bathrooms
– Mild Steel
– Galvanised Steel
TruVelvet is based on an adhesion promoted pure acrylic emulsion that offers SABS stain resistance. This high performance coating is ideal for interior surfaces where superior adhesion, block – and stain resistance is required. TruVelvet has excellent flow and levelling properties and dries to a beautiful velvet sheen finish with anti mould and – fungal technology for use in kitchens and bathrooms. It is virtually odour free for ease of application.
General Preparations
All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize. Apply HydroEtch/AllPrime, to stabilize surface. If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.