PolyAlkyd
Apply @ 10sqm/L per coat
– Solvent based Interior
– Polyurethane floor alkyd
– Heavy duty
– Excellent flow and leveling
– Direct application
– Mild Steel
– Galvanised Steel
– Floors
PolyAlkyd is a polyurethane based heavy duty floor coating with excellent flow and levelling. Formulated for direct application to stable concrete and cement floors. PolyAlkyd is alkali-resistant and dries to a smooth gloss finish. Recommended for interior use only.
General Preparations
All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize. Apply HydroEtch/AllPrime, to stabilize surface. If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.