HydroEtch
Apply @ 8sqm/L per coat
– Interior & Exterior
– Adhesion promoted primer / undercoat
– Anti-corrosive
– Mild- & galvanised steel surfaces
– Mild Steel
– Galvanised Steel
– PVC
– Glass
– Ceramic Wall Tiles
WallPrime is based on an APEO free water borne styrene acrylic solution polymer emulsion. It features exceptional adhesion, deep penetration, sealing and water repellent properties. WallPrime is an alternative to traditional solvent based plaster primers. It offers exceptional long term durability, water repellence and breathability. WallPrime is chalk-, lime-, and alkali resistant.
General Preparations
All surfaces must be clean, sound and dry.
Remove all loose flakes and apply WallPrime, to obtain a stable surface.
Even-out imperfections with WallSkim and fill cracks with WallFill.
To stabilize chalky surfaces, apply WallPrime.
Previously painted sound surfaces can be washed with sugar soap and rinse thoroughly with clean water.
To ease application, sand previously painted stable surfaces.
For water damaged, porous and alkaline surfaces, Apply WallPrime, to stabilize surface.
Remove rust on mild steel and galvanize.
Apply HydroEtch/AllPrime, to stabilize surface.
If rust cannot be removed completely, spot prime with a rust converter before application of primer.
Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.