A preparatory coating to be applied directly to new or weathered substrates. The deep penetrating properties will create an inter-locking mechanism for proper adhesion between surfaces and total paint system. An etch primer should be applied to non-penetrating, low energy substrates.
– Water Based – Solvent/Oil Based
WallPrime
Deep penetrating
Apply @ 8sqm/L per coat
– Features
– Deep penetrating moisture tolerant acrylic plaster primer.
– Water based alternative to traditional alkyd based plaster primer.
– Environmentally friendly APEO free acrylic solution polymer.
– Excellent opacity and overcoating ability.
– Chalk-, lime and alkaline resistant.
– Provides a sound surface for long term stability.
– Where to use
– Hard wood, soft wood and chipboard.
BondAll
Bonding liquid
Apply @ 10-12sqm/L per coat
– Features
– Deep penetrating moisture tolerant acrylic bonding liquid.
– Water based alternative to traditional alkyd based bonding liquid.
– Environmentally friendly APEO free acrylic solution polymer.
– Excellent adhesion and overcoating ability.
– Chalk-, lime and alkaline resistant.
– Provides a sound surface for long term stability.
– Where to use
– Dry and porous stable cement plaster, concrete, brickwork, fibre-cement, gypsum plaster, clay- and cementitious tiles.
HydroEtch
Multi surface primer
Apply @ 10sqm/L per coat
– Features
– Multi surface acrylic etching primer and undercoat.
– Formulated with activated zinc phosphate and flash rust inhibitor as anti-corrosive additives for long term durability and stability.
– Etching primer for non-penetrating low energy surfaces.
– Water based alternative to traditional alkyd based etching primers.
– Where to use
– Stable mild– and galvanised steel, PVC, glass, ceramic wall tiles and various non-penetrating low energy surfaces.
– Environmentally friendly primer for sensitive areas i.e. wine cellars etc.
AllPrime
Metal primer
Apply @ 8sqm/L per coat
– Features
– Rust resistant acrylic primer and undercoat.
– Formulated with activated zinc phosphate and flash rust inhibitor as anti-corrosive additives for long term durability and stability.
– Water based alternative to traditional alkyd based steel primers.
– Where to use
– Stable mild– and galvanised steel.
Top Coats provide the decorative, protective and informative features. Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
NonDrip
Polyurethane enamel
Apply @ 8-10sqm/L per coat
– Features
– Non-drip thixotropic alkyd enamel.
– Dries to a satin finish.
– Hard and durable polyurethane based coating.
– Excellent flow and levelling.
– Quality guarantee does not apply to exterior applications.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, and gypsum plaster.
– Interior suitably primed new and previously painted stable mild-, galvanised steel and wood.
Top Coats provide the decorative, protective and informative features. Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
Kwartz
Matt coarse texture
Apply @4sqm/L per coat
– Features
– Matt coarse texture finish.
– Bridge fine hairline cracks to prevent moisture ingress.
– Hides minor imperfections.
– UV and moisture resistant.
– Features
– Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
FlexiTex Medium
Medium texture finish
Apply @ 6-8sqm/L per coat
– Features
– Low sheen medium texture finish.
– Bridge fine hairline cracks to prevent moisture ingress.
– Hides minor imperfections.
– Dries to a flexible and resilient film for long term durability.
– UV and moisture resistant.
– Where to use
– Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
KladAll
Waterproof sheen
Apply @ 10sqm/L per coat
– Features
– Formulated as a hydrophobic exterior waterproof coating ideal for humid and coastal regions.
– Mold, fungal and UV resistant.
– Flexible fibre reinforced film for long term durability.
– Bridge hairline cracks.
– Dries to a medium sheen finish.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Virtually odourless for ease of application.
– Where to use
– Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement and gypsum plaster.
– Areas exposed to direct moisture and high humidity.
SunShield
Heat reflective roof
Apply @ 8-10sqm/L per coat
– Features
– Dries to a smooth hydrophobic low sheen finish.
– Colourfast.
– UV, moisture and fungal resistant.
– Direct application to dry and stable paving. Regular maintenance coats might be required depending on traffic and conditions.
– Quality guarantee does not apply to application on floors, paving and pots.
– Heat reflective technology for long term durability and improved TSR (total solar reflectance) of minimum 30% compared to the same colour in ApEx or Roof&Pave. White with the highest TSR is recommended as a base coat to further improve reflective value.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Virtually odourless for ease of application.
– Where to use
– Suitably primed new and previously painted stable galvanised, tile and clay pitched roofs.
– Dry cementitious paving, cobble stones and garden pots.
BaDgr
Fine texture finish
Apply @ 6sqm/L per coat
– Features
– Lap mark free fine texture finish.
– Dust and dirt proof.
– Hides minor imperfections.
– Hides minor imperfections to prevent moisture ingress.
– UV and moisture resistant.
– Where to use
– Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.
ApEx
Low sheen roof coating
Apply @ 6-8sqm/L per coat
– Features
– Dries to a smooth low sheen finish.
– Colourfast.
– UV, water and fungal resistant.
– Direct application to dry and stable paving. Regular maintenance coats might be required depending on traffic and conditions.
– Quality guarantee does not apply to application on floors, paving and pots.
– Where to use
– Suitably primed new and previously painted stable galvanised, tile and clay pitched roofs.
– Dry cementitious paving, cobble stones and garden pots.
Top Coats provide the decorative, protective and informative features. Selection of top coat must be according to purpose and expectation.
– Water Based – Solvent/Oil Based
HydroShell
Water based enamel
Apply @ 8-10sqm/L per coat
– Features
– Adhesion promoted odourless high sheen for multiple surfaces.
– Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
– Hard and durable, block and stain barrier non yellowing water based enamel.
– Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
– Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
TruVelvet®
Odourless mid sheen
Apply @ 10-12sqm/L per coat
– Features
– Fast drying, adhesion promoted odourless mid sheen for multiple surfaces.
– Long term, broad spectrum anti-bacterial and fungal protection (silver technology).
– Hard and durable, block and stain barrier non yellowing Eggshell alternative.
– Excellent flow and levelling for a forgiving and superior finish even for the inexperienced applicator.
– Where to use
– Interior walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibre-cement and gypsum plaster.
– Interior and exterior suitably primed new and previously painted stable mild-, galvanised steel and wood.
– Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
EnviroSilk®
Hygienic sheen
Apply @ 10sqm/L per coat
– Features
– Hydrophobic flexible smooth low sheen for exterior use.
– Stain, dirt, UV, mold and fungal resistant.
– Fully washable with excellent flow and levelling for interior use.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Long term, broad spectrum anti-bacterial protection (silver technology).
– Virtually odourless for ease of application.
– Where to use
– Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, galvanised steel, fibre-cement and gypsum plaster.
– Specially formulated for areas were long-lasting cleanliness and freshness is required i.e. children’s rooms, hospitals, etc.
PinAcle
Interior/exterior sheen
Apply @ 10sqm/L per coat
– Features
– Formulated for interior and exterior use.
– Dries to a resilient smooth low sheen finish.
– Fully washable and stain resistant for interior use.
– UV and dirt resistant for exterior use.
– Good flow and levelling.
– Low odour for ease of application.
– Where to use
– Walls & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, galvanised metals, fibre-cement and gypsum plaster.
AlUre
Suede sheen
Apply @ 10sqm/L per coat
– Features
– Hydrophobic flexible smooth suede sheen for exterior use.
– Stain, dirt, UV, mold and fungal resistant.
– Fully washable for interior use.
– Hides minor imperfections.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Virtually odourless for ease of application.
– Where to use
– Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement, galvanised steel and gypsum plaster.
SoMat
Interior / exterior matt
Apply @ 8-10sqm/L per coat
– Features
– Walls & ceilings top coat.
– Interior – dries to a fully washable stain resistant matt finish.
– Washable – do not scrub or abrade.
– Exterior – breathable, moisture and UV resistant for long term durability.
– Hides minor imperfections.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Virtually odourless for ease of application.
– Where to use
– Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, fibrecement and gypsum plaster.
HiGloss
High gloss enamel
Apply @ 10-12sqm/L per coat
– Features
– General purpose gloss enamel.
– Dries to a high gloss finish.
– Interior and exterior use.
– Highly durable, heavy duty coating.
– Excellent flow and levelling.
– UV resistant.
– Super White dries to a non-yellowing film.
– Where to use
– Walls, trims & ceilings: suitably primed new cement plaster, concrete, porous brickwork, various types of building boards, wood, mild-, galvanised metals and gypsum plaster.
– For areas where hard wearing and block resistance is required.
– Water Based – Solvent/Oil Based
HydroKey
Cement additive
Apply @ 0.5-10sqm/L per coat (depending on application)
– Features
– Acrylic bonding and keying agent.
– Penetrates, bonds and enhance adhesion for long term stability.
– Improves drying time, flexural, tensile strength and resilience of cementitious and gypsum products.
– Resists water penetration and movement through cementitious and gypsums substrates.
– For a water barrier homogenous slurry mix 5L HydroKey, 7.5Kg sieved plaster sand and 2.5Kg Portland cement.
– As additive to plaster mix, HydroKey may be diluted up to 1:1 with water.
– Apply undiluted to substrate when used as a keying agent, allow to air dry before application of new plaster or gypsum.
– Does not solve rising damp problems or waterproofing of high hydrostatic pressures.
– Where to use
– Dry and porous stable cement plaster, concrete, brickwork, fibre-cement and gypsum plaster.
GlazeCoat
Water based sealer
Apply @ 10-12sqm/L per coat
– Features
– Multi-surface non yellowing water based sealer.
– Enhance the natural colour of the substrate.
– Suitable as an alternative to traditional alkyd based brick dressing.
– Enhance and protect acrylic artwork.
– Fast drying, excellent flow and levelling.
– Dries to a medium sheen finish for interior and exterior use.
– Flexible for long term durability.
– Where to use
– Hard and soft wood, chipboard, concrete, clay, sandstone, face brick and canvas fabric.
RuBon
Liquid rubber
Apply @ 5sqm/L per coat
– Features
– UV resistant liquid rubber.
– Waterproofing primer, undercoat and topcoat with excellent ponding properties.
– Airless spray application for excellent flow and levelling.
– Dries to a high build smooth colourfast sheen finish.
– Formulated with activated zinc phosphate and flash rust inhibitor as anti-corrosive additives for long term durability and stability.
– May be used with or without membrane.
– Environmentally friendly, APEO, Ammonia, Formaldehyde and Iso-Thiazalone free.
– Where to use
– Suitably primed new and previously painted stable galvanised, tile and clay roofs.
– Not suitable for over coating bitumen based products.
PolyAlkyd
Floor coating
Apply @ 10-12sqm/L per coat
– Features
– Heavy duty polyurethane based floor coating.
– Direct application to most stable substrates.
– Excellent flow and levelling.
– Dries to a smooth low gloss finish.
– Heavy duty coating where extra durability is required.
– Not recommended for areas exposed to UV.
– Where to use
– Stable concrete, cementitious and wooden substrates.
– For high traffic areas i.e. floors, stairs, doors, trims, showrooms, workshops etc.
Krete
Scratch plaster
Apply @ 1sqm/3KG
– Features
– Trowel application
– Textured
– Hides imperfections
– Bridge hairline cracks
– Low VOC
Kuede
Scratch plaster
Apply @ 1sqm/3KG
– Features
– Trowel application
– Textured
– Hides imperfections
– Bridge hairline cracks
– Low VOC
Kloud
Scratch plaster
Apply @ 2sqm/L
– Features
– Roller application
– Textured
– Hides imperfections
– Bridge hairline cracks
– Low VOC
RoadMark
Abrasive resistant
Apply @ 3-4sqm/L per coat
– Features
– Abrasive resistant road mark coating.
– Quick dry for high traffic areas.
– Direct application to stable tar, brick and concrete surfaces.
– Red is not recommended for direct application to cementitious substrates.
– Dries to a smooth low sheen finish.
– Where to use
– Stable concrete, cementitious and tar substrates.
Silver Aluminium
Brilliant silver
Apply @ 20+sqm/L per coat
– Features
– Protective and decorative alkyd coating.
– Dries to a brilliant silver finish.
– UV resistant with high reflective properties.
– Heat resistant up to 100 °C.
– Where to use
– Suitably primed new and previously painted stable mild-, galvanised and various metal surfaces i.e. castiron, copper etc.
– For flat and pitched surfaces.
Bitumen Aluminium
Silver coat
Apply @ 12-16sqm/L per coat
– Features
– Protective silver alkyd enamel coating.
– Dries to a flexible low gloss finish.
– Heavy duty UV resistant coating.
– Superior anti corrosive and rust resistant properties.
– Contains water scavenger technology for improved in can stability.
– Excellent ponding capability.
– Where to use
– Direct application to new and previously painted stable mild-, galvanised steel and cementitious substrates where there is no direct handling of the paint surface required.
– For flat and pitched surfaces.
– Direct application over bituminous sealers and products.
– Not for use in water storage tanks or ponds with aquatic life.
Block the pores in concrete and forms an impermeable layer to reduce the passage and absorption of moisture
– Water Based – Solvent/Oil Based
HydroSeal
Roof sealer
Apply @ 4-6sqm/L per coat
– Features
– Long life premium acrylic waterproofing.
– Highly flexible and UV resistant for long term durability.
– Use with membrane when sealing roofs.
– It is recommended to overcoat for long term durability.
– Do not coat over bitumen products.
– Where to use
– Properly prepared pitched tile and galvanized iron roofs.
HydroFlex
Waterproofing
Apply @ 4-6sqm/L per coat
– Features
– Fibre reinforced acrylic waterproofing.
– Highly flexible and UV resistant for long term durability.
– May be used with membrane when sealing roofs.
– For parapets and walls apply in a criss-cross pattern to improve bridging of fine hairline cracks.
– Not recommended for negative water pressure areas.
– It is recommended to overcoat for long term durability.
– Do not coat over bitumen products.
– Where to use
– Properly prepared pitched tile and galvanized iron roofs.
– Stable plastered walls and parapets.
– Water Based – Solvent/Oil Based
HydroVar
Water based varnish
Apply @ 12sqm/L per coat
– Features
– Multi-surface non yellowing water based varnish.
– Fast drying and mar resistant.
– Excellent flow and levelling.
– Dries to a low gloss finish.
– Preserves the natural colour of the substrate.
– Hard and durable.
– Alternative to alkyd based varnish.
– Where to use
– Hard-, soft wood, chipboard and concrete.
– Multi-surface i.e. garden furniture, floors, doors and trims etc.
PolyDure
Interior varnish
Apply @ 10-12sqm/L per coat
– Features
– Polyurethane based heavy duty coating.
– Formulated for high traffic areas.
– Scuff resistant.
– Excellent flow and levelling.
– Available in gloss and satin finish.
– Long life.
– For interior use only.
– Where to use
– Hard-, soft wood, chipboard, brick and concrete.
– High traffic areas I.e. coffee tables, trims, doors etc.
PolyFloor
Floor varnish
Apply @ 10-12sqm/L per coat
– Features
– Polyurethane based heavy duty coating.
– Formulated for high traffic areas.
– Scuff resistant.
– Excellent flow and levelling.
– Available in gloss and satin finish.
– Long life.
– For interior use only.
– Where to use
– Hard-, soft wood and concrete.
– Wooden and concrete floors where extra durability is required.
UvProof
Exterior varnish
Apply @ 10-12sqm/L per coat
– Features
– Long oil based UV protected coating.
– Formulated for maximum exterior stability.
– Excellent flow and levelling.
– Dries to a smooth high gloss finish.
– Long life.
– Where to use
– Hard-, soft wood and chipboard i.e. exterior trims and window frames etc.
– Not suitable for heavy traffic areas i.e. decks.
WoodPreserve
Penetrating sealer
Apply @ 10-14sqm/L per coat
– Features
– Deep penetrating oil preservative and sealer.
– Suitable for interior and exterior use.
– UV and weather resistant.
– Protects and preserves exterior wood finish.
– Does not peel, crack or chip.
– Where to use
– Exterior hard- and soft wood.
Int/Ext Varnish
Multi-Purpose
Apply @ 10-12sqm/L per coat
– Features
– Multi-purpose interior and exterior wood varnish.
– Enhance and protect interior and exterior face brick and slasto.
– Dries to a smooth gloss finish.
– Highly durable.
– Where to use
– Hard-, soft wood and chipboard.
– Interior and exterior woodwork.
EZVar
Gloss varnish
Apply @ 8-10sqm/L per coat
– Features
– General purpose wood varnish.
– Dries to a gloss finish.
– Interior and exterior use.
– Where to use
– Hard wood, soft wood and chipboard.
Need expert advice on your next project?
Visit your nearest dealer for advice and tips to make your next painting project a success.
LAMININ COATINGS (PTY) LTD