Laminin Coatings Laminin Coatings

A preparatory coating to be applied directly to new or weathered substrates. The deep penetrating properties will create an inter-locking mechanism for proper adhesion between surfaces and total paint system.  An etch primer should be applied to non-penetrating, low energy substrates.

Water Based    Solvent/Oil Based

Apply @ 8sqm/L per coat

Features

  • Acrylic primer, sealer and undercoat.
  • Direct application to dry and porous cementitious substrates to provide a sound surface.
  • Excellent adhesion and overcoating ability.

Where to use

  • Dry and porous stable cement plaster, concrete, brickwork and fibre-cement.

A high pigmented coating to be applied over primer for film-build. Apply over previously painted stable surfaces to improve opacity and adhesion.

Water Based    Solvent/Oil Based

Apply @ 6sqm/L per coat

Features

  • Multi-purpose high PVC PVA..
  • High build coating that is easy to sand.
  • Universal undercoat over previously painted acrylic systems.

Where to use

  • Walls & ceilings: suitably primed and previously painted stable cement plaster, concrete, porous brickwork, fibre-cement and gypsum plaster.

Apply @ 6sqm/L per coat

Features

  • General purpose economic high PVC PVA.
  • High build coating that is easy to sand.
  • Blocking coat over previously painted acrylic systems.

Where to use

  • Walls & ceilings: suitably primed and previously
    painted stable cement plaster, concrete, porous
    brickwork, fibre-cement and gypsum plaster.

Top Coats provide the decorative, protective and informative features.
Selection of top coat must be according to purpose and expectation.

Water Based    Solvent/Oil Based

Apply @ 6-8sqm/L per coat

Features

  • ALL – IN – ONE – primer / undercoat / topcoat if applied over dry and porous surfaces.
  • For long term stability and durability apply an alkaline resistant primer.
  • Dries to a smooth waterproof matt finish.

Where to use

  • Suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, fibrecement and gypsum plaster.

Apply @ 6-10sqm/L per coat

Features

  • Interior – dries to an ultra matt finish that hides minor imperfections.
  • Washable – can be wiped with a damp cloth and allow to dry. Do not scrub or abrade.
  • Exterior – not recommended for areas exposed to regular moisture or rainfall.
  • High PVC coating with a low moisture uptake. Moisture will evaporate without damage to the film.

Where to use

  • Walls & ceilings: suitably primed new and previously painted stable cement plaster, concrete, porous brickwork, various types of building boards, wood, fibre-cement and gypsum plaster.

Apply @ 6sqm/L per coat

Features

  • Washable low sheen finish.
  • Water resistant properties for exterior use.
  • Fully washable for interior surfaces.

Where to use

  • Walls: suitably primed new and previously painted
    stable cement plaster, concrete, porous brickwork,
    various types of building boards, wood, fibre-cement
    and gypsum plaster.

Block the pores in concrete and forms an impermeable layer to reduce the passage and absorption of moisture

Water Based    Solvent/Oil Based

Apply @ 3sqm/L per coat

Features

  • Economical acrylic waterproofing with membrane.
  • Not recommended for ponding or negative water pressure areas.
  • Seal porous surfaces like tiled roofs with acrylic BondAll.
  • Overcoat with Roof&Pave or Apex for long term durability.
  • Do not coat over bitumen products.

Where to use

  • Pitched tile and galvanized iron roofs.

DISTRIBUTION CENTRES
FREE STATE / NORTHERN CAPE / NORTH WEST
051 433 1960 | 051 447 9413

WESTERN CAPE | 021 851 0337
EASTERN CAPE | 087 354 0889
GAUTENG | 074 444 4461
©2022 LAMININ Coatings (PTY) Ltd | Disclaimer