Laminin Coatings Laminin Coatings

Need to know

Important information to keep in mind before you start with your new project

General Preparation

  • All surfaces must be clean, sound & dry.
  • Remove all loose flakes and apply WallPrime, PlasterPrime or BondAll to obtain a stable surface.
  • Smooth out imperfections with Skim and repair cracks with Fill.  To stabilise chalky surfaces, apply WallPrime, PlasterPrime or BondAll.
  • To ease application, sand previously painted stable surfaces.
  • For water damaged, porous and alkaline surfaces, apply WallPrime, PlasterPrime, BondAll or DampCure to stabilise surface.
  • Remove rust from mild steel and galvanized substrates. Apply HydroEtch to stabilise surface. If rust cannot be removed completely, spot prime with a rust converter before applying HydroEtch.
  • Before recoating, sand previously varnished surfaces well to remove mirror-like image to a flat film.
  • Apply WoodPrime to all new or weathered wood surfaces before recoating with top coat.

Precautions

  • Avoid painting in moist/humid conditions. To allow applied paint to cure, there should be no rain forecast for at least 7 days.
  • Do not paint over surfaces with moisture content above 15%. Ideal level 5% or less.
  • Stir paint well with a flat paddle.
  • Avoid painting in moist / humid conditions.
  • Ideal application conditions and surface temperature should be between: 10 oC – 35 oC with a relative humidity of less than 75%. It is not recommended to paint in direct sunlight as this will result in the paint drying to fast leading to visible “lap-marks”. Windy conditions might have a similar effect and can cause a deposit of dust particles on the wet paint.
  • To ensure colour– and sheen level consistency, purchase from the same production batch of paint.
  • Tint bases contain fewer litres than advertised until tinted.
  • Spreading rates are theoretical and based on smooth / flat surfaces.
  • Do not wash or abrade newly painted surfaces until properly cured.
  • Allow 7 days for paint to dry properly and 30 days to reach full strength.
  • Store paint in a cool, dry place.

Health & Safety

  • Keep out of children’s reach.
  • Do not eat, drink or smoke during any application.
  • Ensure appropriate ventilation during application and drying.
  • Harmful if swallowed.
  • Wear protective equipment during preparation, application and cleaning.
  • Avoid contact with eyes.
  • In case of contact, seek medical advice.
  • Avoid contact with skin. In case of contact, clean with appropriate solvent.
  • If skin irritation occurs, seek medical advice.
LAMININ COATINGS (PTY) LTD
13 MONUMENT ROAD
ORANJESIG
BLOEMFONTEIN 9301
info@laminincoatings.co.za
FREE STATE | 051 433 1960 | 051 447 9413
WESTERN CAPE | 021 851 0337
EASTERN CAPE | 043 722 0745
GAUTENG | 012 661 0668
NORTHERN CAPE | 051 433 1960 | 051 447 9413
©2016 LAMININ Coatings (PTY) Ltd | Disclaimer